.psd/jcr:content/renditions/cq5dam.thumbnail.319.319.png)
Part Loaded Indicator
Application: Signaling proper placement in a work station
Challenges: Indication must be visible from across the work station
Solution: EZ-LIGHT K50L Series Domed Indicator
Benefits: Bright, easy-to-see LED lights
To signal to an operator that a part is placed correctly, without leaving the station
Description
Before the EZ-LIGHT K50L indicator light was installed, the operator would place a part on the machine and then step out of the work area to check the stack light to see if the part was loaded properly. If not, the operator had to repeat the set-and-check process before initiating the machine's action on the part.
Since the K50L was installed inside the workstation, using a simple Y splice, the operator can tell immediately if the part is correctly placed.
Featured Products
K50 Core Series 50 mm General Purpose LED Indicator
Our most popular indicator light. The 50 mm general-purpose indicator is available in both AC and DC supply voltage.