.psd/jcr:content/renditions/cq5dam.thumbnail.319.319.png)
Sure Cross® MultiHop Serial Data Radios are compact industrial, low-power wireless communication devices used to extend the range of serial communication networks.
- Available in two frequencies, 900 MHz and 2.4 GHz
- DIP switches select operational modes: master, repeater or slave
- No software required for deployment
- Serial communication style (RS-232 or RS-485) is user-selectable on DX80 housing models
Technical Documents
Technical Literature
Software
Software
Marketing Literature
Marketing Literature
Application Notes
Controlling Pivot Irrigation
A municipality has over 30 farm fields irrigated with gray water using pivot irrigation systems. Local regulations prohibit the irrigation system from spraying over roads and ditches. The customer needs a solution that can reliably control the water flow to the end nozzle based on predetermined location coordinates.
Gravity Irrigation with Pump and Flow Control
The Gateway, or wireless network controller, monitors the water level inside the water tank. When the water level drops, a Node installed with the reservoir pumps uses its outputs to cycle the pumps on or off. A series of Nodes monitors the amount of water flowing into each orchard. A 1 Watt Data Radio connected to the Gateway transmits the data to a mobile asset or a centralized control center for data processing and billing.
Videos
How-To Guide: R70SR Serial Radio Overview Binding and Site Survey
Learn how to set up the different modes, bind, and do a site survey on the R70 Serial Data Radios.
-
-
-
DX80SR9M-H
Serial Data Radio Multihop 900 MHz 1 W
External Antenna
No Inputs or Outputs
4-Position Terminal -
DX80SR2M-H
Serial Data Radio Multihop 2.4 GHz 65 mW
External Antenna
No Inputs or Outputs
4-Position Terminal -
DX80SR2M-HL
Serial Data Radio Multihop 2.4 GHz 65 mW
Internal Antenna
No Inputs or Outputs
5-pin M12 Integral QD -
DX80SR9M-HL
Serial Data Radio Multihop 900 MHz 1 W
Internal Antenna
No Inputs or Outputs
5-pin M12 Integral QD