Wireless Vibration Monitoring Selection
Identify equipment problems early before a failure can occur by monitoring the health of motors, fans, pumps, and other rotating equipment. Banner’s wireless vibration monitoring solutions make it easy and cost effective to monitor a variety of vibration characteristics and set warning and alarm thresholds, as well as collect vibration data over time for trending and analysis.
Businesses benefit from several key advantages:
- Eliminate costly downtime due to motor failures
- Schedule maintenance more efficiently
- Easily monitor remote and hard to reach assets using wireless vibration monitoring
- Send data to the cloud and access remotely
For a simplified setup, Banner’s Vibration Monitoring Solutions Kit comes with a pre-programmed DXM controller and HMI. The Solutions Kit makes it easy for a user of any level to set up the wireless network, establish baselines and thresholds, and visually create “check engine lights” on the HMI.
Sensor + Node
Q45 All-in-One Series for Predictive Maintenance
The Q45VAC combines a VT1 vibration and temperature sensor, a Q45VTP wireless node, and a battery power supply in one compact and completely wireless device.
Key Features
All-in-one vibration and temperature sensor and node
Just one part to order and install
Uses a 1-wire serial interface
Starting At: $ USD
Learn More →
Controller + HMI
Wireless Solutions Kit
Fully integrated and easy-to-use solutions to solve specific applications like vibration monitoring.
Key Features
No programming required
Includes pre-programmed DXM controller and HMI
Access data directly on the HMI or send to the network or the cloud to access remotely
Starting At: $ USD
Learn More →
1-Wire Serial Sensor
2-Axis Vibration Sensors
QM30VT Series sensors have a low-profile design and rigid metal construction that reduces resonant interference and increases surface contact, enabling exceptional levels of accuracy in measuring RMS velocity and temperature.
Key Features
Communicates performance data using a MultiHop Modbus Radio or 1-Wire Serial Node to a DXM Series wireless controller or gateway
Detects potential problems on motors, fans, pumps, and any machine with rotating motion or vibration
Ultracompact design fits easily in small spaces
Starting At: $ USD
Learn More →
Wired or Wireless
3-Axis Vibration Sensors
3-Axis Vibration Monitoring enables predictive maintenance, real-time alerts, and flexible deployment options for easy downtime prevention.
Key Features
3-axis sensing: Capture a complete picture of machine health
Wide frequency range: Monitor a full range of equipment and fault types with 6–5300 Hz detection
High-speed sampling: Prevent downtime in high-speed devices
FMax: Fine-tune resolution to catch faults on both high- and low-speed machinery
HFE: Filter out low-frequency noise to isolate and detect early-stage bearing and lubrication issues
Starting At: $ USD
Learn More →
Sensor + Node
Controller + HMI
The Q45VAC combines a VT1 vibration and temperature sensor, a Q45VTP wireless node, and a battery power supply in one compact and completely wireless device.
Fully integrated and easy-to-use solutions to solve specific applications like vibration monitoring.
Key Features
All-in-one vibration and temperature sensor and node
Just one part to order and install
Uses a 1-wire serial interface
Key Features
No programming required
Includes pre-programmed DXM controller and HMI
Access data directly on the HMI or send to the network or the cloud to access remotely
Starting At: $ USD
Learn More →Starting At: $ USD
Learn More →
1-Wire Serial Sensor
Wired or Wireless
QM30VT Series sensors have a low-profile design and rigid metal construction that reduces resonant interference and increases surface contact, enabling exceptional levels of accuracy in measuring RMS velocity and temperature.
3-Axis Vibration Monitoring enables predictive maintenance, real-time alerts, and flexible deployment options for easy downtime prevention.
Key Features
Communicates performance data using a MultiHop Modbus Radio or 1-Wire Serial Node to a DXM Series wireless controller or gateway
Detects potential problems on motors, fans, pumps, and any machine with rotating motion or vibration
Ultracompact design fits easily in small spaces
Key Features
3-axis sensing: Capture a complete picture of machine health
Wide frequency range: Monitor a full range of equipment and fault types with 6–5300 Hz detection
High-speed sampling: Prevent downtime in high-speed devices
FMax: Fine-tune resolution to catch faults on both high- and low-speed machinery
HFE: Filter out low-frequency noise to isolate and detect early-stage bearing and lubrication issues
Starting At: $ USD
Learn More →Starting At: $ USD
Learn More →Downloads
All-In-One Sensor & Node Selection
1-Wire Serial Sensor Selection
Modbus Selection
Step 1: Select a Vibration Sensor
Sensor and Node
Q45 All-in-One Series for Predictive Maintenance
The Q45VAC combines a VT1 vibration and temperature sensor, a Q45VTP wireless node, and a battery power supply in one compact and completely wireless device.
Key Features
All-in-one vibration and temperature sensor and node
Just one part to order and install
Uses a 1-wire serial interface
Starting At: $ USD
Learn More →
1-Wire Serial Sensor
2-Axis Vibration Sensors
Works in a variety of machines to identify and predict failures in rotating machinery. Detects dual-axis vibration and provides high accuracy vibration and temperature measurements.
Key Features
Measures multiple vibration characteristics and temperature
One vibration sensor to one node
Uses a 1-wire serial interface
Starting At: $ USD
Learn More →
Modbus Sensor
2-Axis Vibration Sensors
Works in a variety of machines to identify and predict failures in rotating machinery. Detects dual-axis vibration and provides high accuracy vibration and temperature measurements.
Key Features
Measures multiple vibration characteristics and temperature
Functions as a Modbus slave device via RS485
Can be connected via a wireless or wired Modbus network
Starting At: $ USD
Learn More →
Sensor and Node
1-Wire Serial Sensor
Modbus Sensor
The Q45VAC combines a VT1 vibration and temperature sensor, a Q45VTP wireless node, and a battery power supply in one compact and completely wireless device.
Works in a variety of machines to identify and predict failures in rotating machinery. Detects dual-axis vibration and provides high accuracy vibration and temperature measurements.
Works in a variety of machines to identify and predict failures in rotating machinery. Detects dual-axis vibration and provides high accuracy vibration and temperature measurements.
Key Features
All-in-one vibration and temperature sensor and node
Just one part to order and install
Uses a 1-wire serial interface
Key Features
Measures multiple vibration characteristics and temperature
One vibration sensor to one node
Uses a 1-wire serial interface
Key Features
Measures multiple vibration characteristics and temperature
Functions as a Modbus slave device via RS485
Can be connected via a wireless or wired Modbus network
Step 2: Select a Wireless Node
1-Wire Serial Nodes
Q45 Nodes for Predictive Maintenance
Q45 1-Wire Serial Nodes are designed to pair with the VT1 vibration sensors.
Key Features
Vibration characteristics and sample intervals can be set using DIP switches
Easy to use without software
Starting At: $ USD
Learn More →
1-Wire Serial Nodes
Performance Series Industrial Wireless Gateways and Nodes
An I/O radio network that combines long range line-of-sight coverage with ease of deployment and use.
Key Features
Cover large areas with 900 MHz, 1-watt power
Expandable wireless network as needs change
Starting At: $ USD
Learn More →
MultiHop Modbus Radios
MultiHop Modbus I/O Data Radios
MultiHop Modbus Data Radios extend the range of Modbus or other serial communication networks.
Key Features
Use repeaters to extend range, circumvent obstacles
Expandable wireless network as needs change
Modbus host controller required
Starting At: $ USD
Learn More →
1-Wire Serial Nodes
1-Wire Serial Nodes
MultiHop Modbus Radios
Q45 1-Wire Serial Nodes are designed to pair with the VT1 vibration sensors.
An I/O radio network that combines long range line-of-sight coverage with ease of deployment and use.
MultiHop Modbus Data Radios extend the range of Modbus or other serial communication networks.
Key Features
Vibration characteristics and sample intervals can be set using DIP switches
Easy to use without software
Key Features
Cover large areas with 900 MHz, 1-watt power
Expandable wireless network as needs change
Key Features
Use repeaters to extend range, circumvent obstacles
Expandable wireless network as needs change
Modbus host controller required
Step 3: Select a Wireless Gateway
Controller and HMI
Wireless Solutions Kit
Fully integrated and easy-to-use solutions to solve specific applications like vibration monitoring.
Key Features
No programming required
Includes pre-programmed DXM controller and HMI
Access data directly on the HMI or send to the network or the cloud to access remotely
Starting At: $ USD
Learn More →
Controller with Performance Radio
Gateways
If you have selected the Q45 all-in-one or a VT1 sensor, you must select a DXM with a Performance Radio.
Key Features
Industrial wireless controller that facilitates Industrial Internet of Things (IIoT) applications
High performance wireless communication with Performance Gateway
Starting At: $ USD
Learn More →
Controller with MultiHop Modbus Radio
Gateways
If you have selected a VT2 Modbus Sensor, you must select a DXM with a MultiHop Modbus radio.
Key Features
Industrial wireless controller that facilitates Industrial Internet of Things (IIoT) applications
High performance wireless communication with MultiHop Modbus Radio
Starting At: $ USD
Learn More →
Controller and HMI
Controller with Performance Radio
Controller with MultiHop Modbus Radio
Fully integrated and easy-to-use solutions to solve specific applications like vibration monitoring.
If you have selected the Q45 all-in-one or a VT1 sensor, you must select a DXM with a Performance Radio.
If you have selected a VT2 Modbus Sensor, you must select a DXM with a MultiHop Modbus radio.
Key Features
No programming required
Includes pre-programmed DXM controller and HMI
Access data directly on the HMI or send to the network or the cloud to access remotely
Key Features
Industrial wireless controller that facilitates Industrial Internet of Things (IIoT) applications
High performance wireless communication with Performance Gateway
Key Features
Industrial wireless controller that facilitates Industrial Internet of Things (IIoT) applications
High performance wireless communication with MultiHop Modbus Radio
Related Resources
