Custom I/O

If you have a configuration already developed for your Banner I/O block we can load it prior to shipping, saving you time during machine assembly and reducing the opportunity for errors by eliminating this step in your process.

Challenge: A customer was using a Banner DXMR90-X1 industrial controller that had a custom configuration used to monitor several sensors on their machine. Due to the amount of controllers the customer was using, they were spending a substantial amount of time programming each device before installing it.

Solution: The customer shared their configuration file with Banner and a custom part was created so that it arrived with this configuration preprogrammed into their device, saving the customer time during assembly and allowing their technicians to focus on higher priority tasks.

Streamline the connection of cordsets to your I/O blocks by customizing each port with the connector or cable you need.

Challenge: A customer wants to use several unique cordsets to connect between their I/O block and the field devices. This was an issue since many of these cordsets were unique and difficult to source.

Solution: Banner is able to create an I/O block that provided ports with connectors that allowed the customer to use off-the-shelf cables. For example, instead of the standard M12 ports, two ports were changed to M8 ports so that the customer could use a standard double-ended M8 cable instead of a cable with an M12 on one end and an M8 on the other.