DF-G1 Series
General Purpose Fiber Optic Amplifier
- Models with IO-Link enable a point-to-point communication link between a master device and a sensor, facilitating remote monitoring, teaching, and configuration
- Easy to read dual digital displays simultaneously show signal level and threshold
- Simple user interface ensures easy sensor set-up and programming
- Expert TEACH and SET methods ensure optimal gain and threshold for all applications, especially low contrast applications
- IO-LINK models available
- Models for detection of extraneous light sources available
- Response speeds as fast as 200 µs
- Thermally stable electronics minimize warm-up drift and reduce the effect of side-by-side mounting of multiple fiber amplifiers
- ECO (economy) display mode reduces amplifier power consumption by 25%
- Cross talk avoidance algorithm allows two fiber assemblies to operate in close proximity for many applications
Downloads
技術文獻
產品資料檔案
PLC Support Files
軟體
行銷資料
Application Notes
車窗隔熱紙檢驗
Banner的DF-G1光接收器感測器根據外面光線穿透玻璃板的多寡,來區分車窗隔熱紙的有無。DF-G1設備齊全,有簡單的設定按鈕,便於沿著輸送帶進行調整。直覺的用戶顯示螢幕可立即提供感測器數值。
光接收器偵測廣譜光
Banner的DF-G1光纖光接收器是一種具有成本效益的獨特產品,用來直接放在測試設備中,確保燈具正常運作。經由與其他DF-G1型號相同的直觀雙顯示和程式設計介面,光接收器可與組裝和測試設備控制系統整合和相接,用於通過/未通過的檢查。
水中的晶圓盒偵測
矽晶圓放置在晶圓盒中,在完全浸沒在去離子水中的輸送帶上,從一個流程轉送到另一個流程。D10感測器的聚四氟乙烯封裝對照模式纖維位於輸送帶兩側。晶圓盒存在時,對照的光束就會被遮斷。
注射器檢查
DF-G1感測器可以在有限的空間的包裝過程中輕鬆配置,可用於偵測如注射器等小目標。使用Banner強大的TEACH和SET方法,可將最佳增益和閾值用於一系列應用,包括低對比度和長程應用。
Pick and Place Machine Leading Edge Detection
Fiber optics are an ideal solution for pick and place machines because of their small size. DF-G1 amplifiers can be separated from fibers so the operator has easy access to the digital dual-display screen for data monitoring. Additionally, the cross talk avoidance algorithm allows two or more amplifiers to operate in close proximity to each other.
小零件計數
Banner's DF-G1 Series amplifier provides a simple setup and calibration for small part counting applications. Once the amplifier is setup, the easy-to-read digital dual display allows for simple operation because it shows the signal level and threshold simultaneously.
Videos
DF-G1 Liquid Level Detection [Video]
DF-G1專家級雙顯示光纖放大器是一種易於使用的光纖檢測系統,可快速設置,節省安裝時間。使用者介面直覺易懂,放大器具備雙數位顯示螢幕,僅需簡單操作即可同時顯示信號強度和開關值。DF-G1提供最佳性能,僅需幾分鐘即可啟動並充分發揮其性能。是漏液偵測和液位控制應用的理想選擇。
How-To Guide: DF-G Dark Set
This video covers the basics of setting up the Dark Set function of the DF-G Fiber Optic Amplifier from Banner Engineering.
How-To Guide DF-G Dynamic Teach
This video covers the basics of setting up the Dynamic Teach function of the DF-G Fiber Optic Amplifier from Banner Engineering.
How-To Guide: DF-G Light Set
This video covers the basics of setting up the Light Set function of the DF-G Fiber Optic Amplifier from Banner Engineering.
How-To Guide: DF-G 2-Point Teach Configuration
This video covers the basics of setting up the DF-G Fiber Optic Amplifier 2-Point Teach Configuration from Banner Engineering.
How-To Guide: DF-G Window Set
This video covers the basics of setting up the Window Set function of the DF-G Fiber Optic Amplifier from Banner Engineering.
-
DF-G1-PS-Q5
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 PNP
150 mm (6 in) 4-pin M12 Pigtail QD -
DF-G1-PS-Q7
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 PNP
4-pin M8 Integral QD -
DF-G1-NS-2M
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
2 m (6.5 ft) Cable -
DF-G1-PS-2M
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 PNP
2 m (6.5 ft) Cable -
DF-G1-KS-Q5
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 18-30 V dc
Output 1: Push/Pull with IO-Link; Output 2: PNP only
150 mm (6 in) 4-pin M12 Pigtail QD -
DF-G1-NR-Q7
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 NPN
4-pin M8 Integral QD -
DF-G1-NS-Q3
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
150 mm (6 in) 4-pin M8 Pigtail QD -
DF-G1-PR-Q5
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 PNP
150 mm (6 in) 4-pin M12 Pigtail QD -
DF-G1-NR-2M
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 NPN
2 m (6.5 ft) Cable -
DF-G1-NS-Q5
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
150 mm (6 in) 4-pin M12 Pigtail QD -
DF-G1-PR-2M
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 PNP
2 m (6.5 ft) Cable -
DF-G1-PR-Q7
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 PNP
4-pin M8 Integral QD -
DF-G1-PS-Q3
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 PNP
150 mm (6 in) 4-pin M8 Pigtail QD -
DF-G1-KS-Q7
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: Push/Pull with IO-Link
4-pin M8 Integral QD -
DF-G1-NR-9M
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source
Input: 10-30 V dc; Output: 1 NPN
9 m (30 ft) Cable -
DF-G1-NR-Q5
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 NPN
150 mm (6 in) 4-pin M12 Pigtail QD -
DF-G1-NS-Q7
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
4-pin M8 Integral QD -
DF-G1-PS-9M
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 PNP
9 m (30 ft) Cable -
DF-G1-KS-2M
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: Push/Pull with IO-Link
2 m (6.5 ft) Cable -
DF-G1-KS-Q3
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: Push/Pull with IO-Link
150 mm (6 in) 4-pin M8 Pigtail QD -
DF-G1-NF-Q7
DF-G1 Dual Display Fiber Amplifier
With Fluorescent Filter
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
4-pin M8 Integral QD -
DF-G1-NR-Q3
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 NPN
150 mm (6 in) 4-pin M8 Pigtail QD -
DF-G1-NS-9M
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
9 m (30 ft) Cable -
DF-G1-PR-Q3
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 PNP
150 mm (6 in) 4-pin M8 Pigtail QD