Serie M18T
Sensores de Temperatura Sin Contacto: Serie M18T
- Works by detecting infrared energy that objects emit
- Senses temperature differences as small as 3° C, on moving or still products
- Senses from 0° to 300° C
- Available with analog or discrete outputs
- Allows threshold adjustment and real-time information display through a PC
- Requires no emitter or controller
- Uses remote or push-button programming
- Available in three models for different target sizes and distances
- Ideal for applications such as detecting hot parts, monitoring rollers, verifying that molded parts have been ejected and detecting hot glue
- Funciona detectando la energía infrarroja que emiten los objetos
- Detecta diferencias de temperatura tan pequeñas como 3° C, en productos en movimiento o estacionarios
- Detecta de 0° a 300° C
- Disponible con salidas analógicas o discretas
- Permite ajustes de umbral e información en tiempo real en pantalla a través de una PC
- No requiere emisor o controlador
- Utiliza programación remota o por medio de botones
- Disponible en tres modelos para objetivos de diferente tamaño y distancia
- Ideal para aplicaciones tales como detección de partes calientes, control de rodillos, verificar que han sido expulsadas piezas moldeadas y detección de pegamento caliente
Have You Unlocked Your Factory Data Yet?
Our Snap Signal converters seamlessly connect incompatible devices by unifying their signals into a single protocol.
Descargas
Documentación técnica
Software
Literatura de Marketing
Aplicaciones
Hot Glue Detection
T-GAGE M18T Series Temperature Sensors are passive, non-contacting, temperature-based devices designed to detect objects that are hotter or colder than the ambient condition, and then activate an output. In this application, the T-GAGE temperature sensor will detect the presence or absence of hot glue on the flaps of the package. If the hot glue is present, the process will continue and the package will be sealed. If it’s absent, the output will trigger a process to apply the hot glue.
![Temperature Sensor Detects Defrost Wires [Success Story]](/content/dam/banner-engineering/3d-renders/application-notes/wcc-migration/2012/T-GAGE-Defrost-Wire-Inspection.psd/jcr:content/renditions/cq5dam.thumbnail.319.319.png)
Temperature Sensor Detects Defrost Wires [Success Story]
An automotive manufacturer was rejecting a supplier’s shipment of rear window assemblies due to faulty defroster grids. The supplier’s existing test procedure measured current draw across the entire heating system to detect an overall failure, but it could not detect the subtle impact of a single heating wire being broken. The window supplier partnered with a Michigan-based machine automation company to create a better test fixture—one that can verify each defrost wire heats to specification prior to shipping.
Hot Glue Detection on a Package
Banner’s T-GAGE M18T temperature sensor is ideal for hot glue verification because it detects the infrared energy an object emits to determine its temperature, sensing from 0⁰C to 300⁰C. In this application, the T-GAGE M18T temperature sensor detects the presence or absence of hot glue on the flaps. If hot glue is present, the package will continue down the manufacturing line;if it is missing, the output will trigger a pusher arm to kick the carton off the conveyor into a bin.
Hot Part Detection in Food Preparation
To ensure that a griddle is on, non-contact T-GAGE M18T temperature sensors are aimed at the cooking surface to detect that the surface is hotter than the surrounding air. If the waffle iron is hot, the batter will be poured in and the process will continue. If it is not hot enough, the T-GAGE temperature sensor output won't trigger the batter release mechanism allowing the iron additional time to heat.
Comunicar el Estado de una Estación de Bombeo de Agua
Los indicadores EZ-LIGHT con Luz Visible a la luz diurna producen niveles intensos de luz, con 18 LEDs que pueden activarse juntos o en 3 grupos de 6 para controlar el nivel de intensidad de la luz, lo que los vuelve ideales para aplicaciones que requieren una comunicación clara en un ambiente al aire libre. Un protector solar opcional aumenta su visibilidad, haciéndolos eficaces incluso en ambientes con altos niveles de luz solar.
Motor Temperature Monitoring and Control with a Wireless Network
Instead of installing I/O transmission cabling, use a 10 to 30V dc powered SureCross Node and a Banner T-GAGE temperature sensor. When using host control systems, the SureCross Gateway transmits the temperature to the plant control room using a digital output related to temperature setpoints within the sensor. The motor is powered down or up based on these temperatures. When using a Gateway Pro as the wireless master device, the data ca be logged and alerts sent out to notify maintenance personnel when a motor is performing outside expected parameters.
Selección de Producto
-
M18TIP14Q
M18T Series: Temperature Sensor
14: 1 Germanium Lens
Output: Analog 4-20 mA; PNP Alarm
5-pin M12 Integral QD -
M18TIP8Q
M18T Series: Temperature Sensor
8: 1 Integrated Lens
Output: Analog 4-20 mA; PNP Alarm
5-pin M12 Integral QD -
M18TIP6EQ
M18T Series: Temperature Sensor
6: 1 Plastic Fresnel Lens
Output: Analog 4-20 mA; PNP Alarm
5-pin M12 Integral QD -
M18TUP14Q
M18T Series: Temperature Sensor
14: 1 Germanium Lens
Output: Analog 0-10 V; PNP Alarm
5-pin M12 Integral QD -
M18TUP8Q
M18T Series: Temperature Sensor
8: 1 Integrated Lens
Output: Analog 0-10 V; PNP Alarm
5-pin M12 Integral QD -
M18TIP14
M18T Series: Temperature Sensor
14: 1 Germanium Lens
Output: Analog 4-20 mA; PNP Alarm
2 m (6.5 ft) Cable -
M18TUP8
M18T Series: Temperature Sensor
8: 1 Integrated Lens
Output: Analog 0-10 V; PNP Alarm
2 m (6.5 ft) Cable -
M18TB14Q
M18T Series: Temperature Sensor
14: 1 Germanium Lens
Output: one NPN, one PNP
5-pin M12 Integral QD -
M18TB8Q
M18T Series: Temperature Sensor
8: 1 Integrated Lens
Output: one NPN, one PNP
5-pin M12 Integral QD -
M18TUP6EQ
M18T Series: Temperature Sensor
6: 1 Plastic Fresnel Lens
Output: Analog 0-10 V; PNP Alarm
5-pin M12 Integral QD -
M18TB6EQ
M18T Series: Temperature Sensor
6: 1 Plastic Fresnel Lens
Output: one NPN, one PNP
5-pin M12 Integral QD -
-
M18TIP8
M18T Series: Temperature Sensor
8: 1 Integrated Lens
Output: Analog 4-20 mA; PNP Alarm
2 m (6.5 ft) Cable -
-
M18TUP14
M18T Series: Temperature Sensor
14: 1 Germanium Lens
Output: Analog 0-10 V; PNP Alarm
2 m (6.5 ft) Cable -
-
M18TIP6E
M18T Series: Temperature Sensor
6: 1 Plastic Fresnel Lens
Output: Analog 4-20 mA; PNP Alarm
2 m (6.5 ft) Cable -
M18TUP6E
M18T Series: Temperature Sensor
6: 1 Plastic Fresnel Lens
Output: Analog 0-10 V; PNP Alarm
2 m (6.5 ft) Cable