Non-Contact Pick-to-Light Point and Array Selection
Non-contact pick-to-light points and arrays use a photoelectric sensor to automatically verify picks and picking sequences during normal pick motion. Optical touch buttons are zero force activated and require no physical pressure to operate for a more ergonomic solution. Furthermore, arrays enable a larger sensing area.
IO-Link Enabled
K50 Pro Series 50 mm Programmable Optical Pick-to-Light
Ergonomic lights ideal for pick-to-light applications in a wide range of industries with rugged versatility of RGB LEDs.
主な特徴
Rated IEC IP67 and IP69K to withstand harsh washdown environments
Immune to ambient light, EMI and RFI interference
Up to fourteen standard colors in one device
Sequence mode is included on IO-Link models and can be adjusted to indicate level, takt time, and more
PICK-IQ models feature faster response speed on Modbus network
開始: $ USD
さらに詳しく →Parts Verification
PVS28 Parts Verification Sensor
Visual operator guidance with touchless activation for fast and reliable picking and fulfillment applications.
主な特徴
- Provides optical sensing and intuitive indication in one device
- No controller needed—devices are completely self-contained
- Resistant to ambient light, EMI, and RFI interference
- Green, yellow, and red indicator colors come standard; 7 colors are available when using Pro Editor
- Available in 100 mm and 225 mm array lengths for small and large bins
開始: $ USD
さらに詳しく →IO-Link Enabled
Parts Verification
Ergonomic lights ideal for pick-to-light applications in a wide range of industries with rugged versatility of RGB LEDs.
Visual operator guidance with touchless activation for fast and reliable picking and fulfillment applications.
主な特徴
Rated IEC IP67 and IP69K to withstand harsh washdown environments
Immune to ambient light, EMI and RFI interference
Up to fourteen standard colors in one device
Sequence mode is included on IO-Link models and can be adjusted to indicate level, takt time, and more
PICK-IQ models feature faster response speed on Modbus network
主な特徴
- Provides optical sensing and intuitive indication in one device
- No controller needed—devices are completely self-contained
- Resistant to ambient light, EMI, and RFI interference
- Green, yellow, and red indicator colors come standard; 7 colors are available when using Pro Editor
- Available in 100 mm and 225 mm array lengths for small and large bins
General Purpose
50 mm光学式ピッキングセンサ:K50シリーズ
Provides improved ways to install a pick-to-light system with the option of industry-standard Modbus RTU protocol for communication.
主な特徴
Max of 3 color displays
5 color options: green, yellow, red, blue, white
12 to 30 V dc power option
IP67, IP69K washdown rated
Modbus compatible
Max sensing range of 2.0 m with polarized retro-reflective or 100 mm with fixed-field
開始: $ USD
さらに詳しく →Scalable
PTL110 Series Scalable, Versatile Pick-to-Light Devices
Cascadable, pick point device with three-digit display and colored indicator, offering speed, flexibility and low installed cost.
主な特徴
3-digit, 7-segment display that can be inverted
14 color choices: red, green, blue, yellow, magenta, orange, violet, white, cyan, amber, lime green, spring green, sky blue, rose
10 to 30 V dc power option
IP54 rated
Wireless and Modbus compatible
PICK-IQ™
開始: $ USD
さらに詳しく →General Purpose
Scalable
Provides improved ways to install a pick-to-light system with the option of industry-standard Modbus RTU protocol for communication.
Cascadable, pick point device with three-digit display and colored indicator, offering speed, flexibility and low installed cost.
主な特徴
Max of 3 color displays
5 color options: green, yellow, red, blue, white
12 to 30 V dc power option
IP67, IP69K washdown rated
Modbus compatible
Max sensing range of 2.0 m with polarized retro-reflective or 100 mm with fixed-field
主な特徴
3-digit, 7-segment display that can be inverted
14 color choices: red, green, blue, yellow, magenta, orange, violet, white, cyan, amber, lime green, spring green, sky blue, rose
10 to 30 V dc power option
IP54 rated
Wireless and Modbus compatible
PICK-IQ™
Key Terms
Pick-IQ
PICK-IQ™ is a purpose-built, Modbus-compatible serial bus protocol that uses a Common ID to reduce the typical latency that results from polling multiple devices.
Need More Information?
Our Experts are available to help you find the right illumination solution!
Single Component
一体型部品確認アレイピックトゥライト:PVDシリーズ
One-component, compact systems that automatically operates in either diffuse or retroreflective mode, depending on your application
主な特徴
12 to 30 V dc power option
IP62 rated
Max sensing range of 2 m for retroreflective or 400 for diffuse models
Available in 100 and 225 mm lengths
開始: $ USD
さらに詳しく →Large Part Sensing
部品確認アレイ:PVLシリーズ
Highly visible pick and mis-pick indication with mounting versatility.
主な特徴
12 to 30 V dc power option
IP50 rated
Max sensing range of 1.5 m
Available in 225 and 500 mm lengths
開始: $ USD
さらに詳しく →4 Lengths
部品ピッキング確認用ピックトゥライト:PVAシリーズ
Compact array, available in 4 lengths to fit many sizes and configurations of existing parts bins.
主な特徴
12 to 30 V dc power option
IP62 rated
Max sensing range of 2 m
Available in 100, 225, 300, and 375 mm lengths
開始: $ USD
さらに詳しく →Illuminated Base
ピッキング確認用タッチボタン :VTB シリーズ
Ergonomic touch button that features a brightly illuminated base for enhanced visual indication.
主な特徴
Max of 2 color displays
3 color options: green, red, blue
12 to 30 V dc
IP66 rated
開始: $ USD
さらに詳しく →Flush Mounting
80 mm照光式ピックトゥライト:K30Lシリーズ
Compact, single-point devices for error-proofing of bin-picking operations with a 50 mm dome.
主な特徴
Max of 2 color displays
3 color options: green, red, yellow
12 to 30 V dc power option
IP65, IP67 rated
Max sensing range of 100 mm
開始: $ USD
さらに詳しく →Single Component
Large Part Sensing
4 Lengths
One-component, compact systems that automatically operates in either diffuse or retroreflective mode, depending on your application
Highly visible pick and mis-pick indication with mounting versatility.
Compact array, available in 4 lengths to fit many sizes and configurations of existing parts bins.
主な特徴
12 to 30 V dc power option
IP62 rated
Max sensing range of 2 m for retroreflective or 400 for diffuse models
Available in 100 and 225 mm lengths
主な特徴
12 to 30 V dc power option
IP50 rated
Max sensing range of 1.5 m
Available in 225 and 500 mm lengths
主な特徴
12 to 30 V dc power option
IP62 rated
Max sensing range of 2 m
Available in 100, 225, 300, and 375 mm lengths
Illuminated Base
Flush Mounting
Ergonomic touch button that features a brightly illuminated base for enhanced visual indication.
Compact, single-point devices for error-proofing of bin-picking operations with a 50 mm dome.
主な特徴
Max of 2 color displays
3 color options: green, red, blue
12 to 30 V dc
IP66 rated
主な特徴
Max of 2 color displays
3 color options: green, red, yellow
12 to 30 V dc power option
IP65, IP67 rated
Max sensing range of 100 mm