XS26-ISDd
Certifications
Amplificateurs compatibles
Dans les cas applicables, la portée maximale des fibres en mode barrière dépend également de la longueur de la fibre.
Spécifications
- Power
- DC
- Network View and Configure
- Yes
- IP Rating
- IP20
- Device Type
- Safety Controller
- In-Series Diagnostics
- Yes
- Safety Module Type
- Base Controller
- Expandable
- Yes
- LCD Display
- Yes
- Dimension (H x W x D in mm)
- 110 x 45 x 129
- Relative Humidity
- 90% @ 50° C
- Max Operating Temperature ( °C)
- 55
- Input Operation
- Simultaneous or Concurrent
- Number of Safe Inputs
- 26
- Input Configuration
- Configurable
- Number of Convertible Inputs
- 8
- Safety Input - Dual Channel (Dry Contact)
- 5-50 mA @ 24 V dc
- Safety Input - Dual Channel (Solid-State)
- 50 mA @ 15 - 30 V dc
- Safety Input - Reset
- 5-50 mA @ 24 V dc
- Independently Controlled Safe Outputs
- 4
- Output Configuration
- 2 OSSD Pairs
- Non Safe Output Configuration
- Up to 11 PNP
- Non Safe Output Rating
- 80 mA @ 24 V dc (individual) max for IOx; overcurrent protected, 500 mA @ 24 V dc for Sox
- Safe Output Rating
- OSSD 0.50 A max. @ 24 V dc
- Splittable Safe Output
- Yes
- Power Consumption
- 0.16 A (controller only); 3.6 A (bus load)
- Response Time (ms)
- See Software Configuration Summary
- Supply Voltage
- 24 V dc +/- 20%
- Terminal Type
- Screw
- Removable Terminals
- Yes
- Vibration
- 9-150 Hz at 1g occasional/0.5g continuous
- PL Rating
- e
- Safety Category Rating
- 4
- SIL Rating
- 3
- SISTEMA
- PFHd = 1.05 x 10-9
- THC Rating
- IIIC
- Safety Input - Single Channel
- 5-50 mA @ 24 V dc
- Input Resistance
- 150 Ω max. per lead
- E-Stops/Rope Pulls
- Yes
- Safety Mat
- Yes
- Motor Speed
- No
- Two-Hand Controls
- Yes
- Muting
- Yes
- Gate Switch (NC/NC) Input
- Yes
- Gate Switch (NC/NO) Input
- Yes
- Gate Switch (OSSD) Input
- Yes
- Light Curtains/Scanner with EDM Input
- Yes
- Light Curtains/Scanner without EDM Input
- Yes
- EtherNet/IP
- Yes
- Modbus/TCP
- Yes
- PCCC
- Yes
- PROFINET
- Yes
- Recovery Time
- 250 (typical), 400 (max)