ES Series and GM Series
Modules de surveillance des dispositifs de protection fixe et d’arrêt d’urgence
- Modules monitor up to 10 external devices for contact failure or wiring faults
- Module goes into lockout mode if it detects a fault
- Available voltages include 24V dc 24V ac/dc 115V ac or 12 to 24V dc or 230V ac or 12 to 24V ac/dc
- Modules monitor positive-opening E-stop and interlock switches
- Models are available with 2 to 4 normally open safety outputs, depending on module
- Safety outputs are rated 4 or 6 amps, depending on module
- Non-safety auxiliary outputs are available on most modules
- Two modules allow central monitoring and control over a DeviceNet control network
- Ratings are NEMA 1 and at least IEC IP20
- Housings are rugged polycarbonate
- Bright red and green LED indicators show modules operating status
- Surveillance possible d'un maximum de 10 dispositifs externes pour détecter les défaillances des contacts ou les défauts de câblage
- Basculement du module en mode verrouillage s'il détecte une défaillance
- Tensions disponibles : 24 Vcc, 24 Vca/cc 115 Vca ou 12 à 24 Vcc ou 230 Vca ou 12 à 24 Vca/cc
- Surveillance des interrupteurs de verrouillage et d'arrêt d'urgence à ouverture positive
- Modèles disponibles avec 2 à 4 sorties de sécurité normalement ouvertes, selon le module
- Sorties de sécurité de 4 ou 6 ampères, selon le module
- Sorties auxiliaires disponibles sur la plupart des modules
- Surveillance centrale et contrôle d'un réseau DeviceNet avec deux modules
- Indice de protection NEMA 1 et au moins IEC IP20
- Boîtiers robustes en polycarbonate
- LED rouge et verte très visibles pour indiquer l'état de fonctionnement des modules
Downloads
Littérature technique
Logiciel
Littérature Marketing
-
ES-FA-9AA
Safety Relay Module for E-Stop/Rope Pull/Interlock
Supply Voltage: 24 V ac/dc
Safety Input: 1 Dual/Single Channel
Safety Output: 3 NO, 6 A; Aux Output: None
Terminal Block: Removable; Width: 22.5 mm
Self-Checking Circuitry, Auto/Manual Reset -
ES-UA-5A
Safety Relay Module for E-Stop/Rope Pull/Interlock
Supply Voltage: 115 V ac or 12-24 V dc
Safety Input: 1 Dual/Single Channel
Safety Output: 4 NO, 6 A; Aux Output: 1 NC, 5 A and 2 Solid-State 0.1 A
Terminal Block: Removable; Width: 45 mm
Self-Checking Circuitry, Auto/Manual Reset -
ES-FA-11AA
Safety Relay Module for E-Stop/Rope Pull/Interlock
Supply Voltage: 24 V ac/dc
Safety Input: 1 Dual/Single Channel
Safety Output: 2 NO, 7 A; Aux Output: 1 NC, 7 A
Terminal Block: Removable; Width: 22.5 mm
Self-Checking Circuitry, Auto/Manual Reset -
GM-FA-10J
Safety Relay Module for Interlocks
Supply Voltage: 24 V ac/dc
Safety Input: Interlocks with complementary contacts
Safety Output: 2 NO, 6 A; Aux Output: None
Terminal Block: Removable; Width: 22.5 mm
Self-Checking Circuitry, Auto/Manual Reset -
ES-FA-6G
Safety Relay Module for E-Stop/Rope Pull/Interlock
Supply Voltage: 24 V ac/dc
Safety Input: 1 Single Channel
Safety Output: 3 NO, 6 A; Aux Output: 1 NC, 6 A
Terminal Block: Fixed; Width: 22.5 mm
Self-Checking Circuitry, Auto/Manual Reset -
ES-VA-5A
Safety Relay Module for E-Stop/Rope Pull/Interlock
Supply Voltage: 230 V ac or 12-24 V dc
Safety Input: 1 Dual/Single Channel
Safety Output: 4 NO, 6 A; Aux Output: 1 NC, 5 A and 2 Solid-State 0.1 A
Terminal Block: Removable; Width: 45 mm
Self-Checking Circuitry, Auto/Manual Reset