.psd/jcr:content/renditions/cq5dam.thumbnail.319.319.png)
SGS - Safety Grid System
SGS Safety Grid Systems are cost-effective multiple beam safety light devices for access and long-range perimeter guarding applications.
Learn More About the SGS Safety Grid System
SGS Safety Grid System
Light grids are suited to a variety of access and long-range perimeter guarding applications. Uses 2, 3, or 4 beams to protect personnel and machinery.
Transcript
Introducing the new SGS Safety Grid System by Banner Engineering.
Banner’s SGS Safety Grid System has a heavy-duty aluminum housing and provides a low-cost perimeter guarding solution for tough environments.
Installation is made simple with on-board alignment lamp and indicators.
Emitter/Receiver models are available as well as Active/Passive models for reduced wiring and cost.
With a range of up to 60 meters, and 2, 3 and 4 beam heights to choose from, Banner’s new Safety Grid System can be used in a wide range of perimeter guarding applications.
Additionally, for end of line packaging applications Banner offers SGS models with integral muting. These models can be paired with SGS mute arm kits for a turn-key solution.
The pre-assembled mute arm kits have multiple configurations and simply plug-n-play connect directly to the SGS Safety Grid.
Material can pass through in mute mode without stopping operations and protects from entry when not muted.
SGS Safety Grid System from Banner Engineering.
Related Videos
SX5-B Safety Laser Scanners
Compact and easy-to-deploy, SX5 Series safety laser scanners protect personnel, equipment, and mobile systems within a user-defined area. They continuously scan a 275° area to create a two-dimensional protected zone that must be crossed to reach the hazard.
Washdown Cover for Emergency Stop Buttons
Banner Engineering’s new Washdown Cover expands the number of applications for which our E-Stop Buttons can be used by raising the product rating up to IP69K and Type 4X. It provides additional protection against environmental hazards for our 30 mm Mount Emergency Stop Buttons without compromising device actuation or visibility. The cover is made of clear, FDA-grade silicone and is both UL and ECOLAB approved. It is available in pre-installed kits for rapid deployment in new installations or as a standalone product, ideal for retrofitting E-Stop buttons in existing installations.
LS Safety Light Curtain with IP69K Hygienic Enclosure
LS safety light curtains are available with an IP69K hygienic enclosure that resists high-pressure, high-temperature washdown and aggressive chemical cleaning. They are ideal for use in food, beverage, and pharmaceutical applications where maintaining sanitary conditions is critical.