Barreira de Verificação de Peça Pick-to-Lights: Série PVA
- Sistema confiável para detecção de erros em operações de montagem.
- Indica para um montador os itens a escolher para determinada operação e a ordem em que devem ser retirados
- Usa um emissor e receptor assíncrono e não exige controlador
- Tensão de alimentação de 12 a 30V dc com saída NPN ou PNP
- Ajuste de chave DIP de LO/DO, indicador de luz de trabalho permanente/intermitente, frequência A/B e polaridade de porta para ativar a luz de trabalho
- Oferecido em quatro comprimentos — 100 mm, 225 mm, 300 mm, 375 mm — para adaptação aos tamanhos de compartimentos
- Acomoda 2 metros de distância de separação
- LEDs indicadores extremamente visíveis incorporados
Downloads
Literatura Técnica
Literatura de Marketing
Notas de Aplicação
Order Fulfillment
The system controller issues an instruction to pick an item from a particular location. The controller turns on the PVA’s job lights at the specified location. The job lights go off when an item from that location is removed. If multiple items are required from one location, the job light stays on until the correct number of items are removed. The bright light of the EZ-LIGHT PVA pick-to-light sensor makes it possible to see which part to pick from a distance, saving time.
Pick Sequence Indication and Pick Verification
A pair of EZ-LIGHT PVA pick-to-light sensors are mounted to a rack on either side of a bin. In response to a signal from a process controller, the PVA illuminates to show the assembler which part to pick next. When the assembler's hand enters and leaves the bin, the controller recognizes that the part is picked and lights up the PVA for the next bin in the pick sequence.
Pick-to-Light Solutions
Several technologies and solutions are available for bin-picking applications for error-proofing processes. Light arrays prompt the operator for part selection with integral job lights, then reliably sense retrieval of the part, using an array of visible red or infrared sensing beams located in front of the bin.
Long Bin Pick-to-Light
The EZ-LIGHT PVA pick-to-light sensors provide a reliable error-proofing solution for various operation systems. The light indicate to assemblers which items to pick and in which order to pick them.
Part Removal Verification in Automotive Assembly
In an automotive assembly plant, temporary pins—called grenade pins—are used to attach some parts temporarily. To make sure the grenade pins are removed, the inspection station includes a container for the pins that is equipped with an EZ-LIGHT PVA pick-to-light sensor.
-
PVA100P6EQ
PVA Series: 100 mm Array - Emitter
Range: 2 m; Input: 12-30 V dc
Output: Not Applicable
2 m M12 Pigtail QD -
PVA100P6RQ
PVA Series: 100 mm Array - Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 PNP Programmable for LO/DO
M12 Pigtail QD -
PVA100P6Q
PVA Series: 100 mm Array Pair - Emitter/Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 PNP (on receiver)
M12 Pigtail QD -
PVA225P6RQ
PVA Series: 225 mm Array - Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 PNP Programmable for LO/DO
M12 Pigtail QD -
PVA225P6EQ
PVA Series: 225 mm Array - Emitter
Range: 2 m; Input: 12-30 V dc
Output: Not Applicable
M12 Pigtail QD -
PVA225P6Q
PVA Series: 225 mm Array Pair - Emitter/Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 PNP (on receiver)
M12 Pigtail QD -
PVA375P6RQ
PVA Series: 375 mm Array - Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 PNP Programmable for LO/DO
M12 Pigtail QD -
PVA100P6
PVA Series: 100 mm Array Pair - Emitter/Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 PNP (on receiver)
2 m (6.5 ft) Integral Cables -
PVA100P6E
PVA Series: 100 mm Array - Emitter
Range: 2 m; Input: 12-30 V dc
Output: Not Applicable
2 m (6.5 ft) Integral Cables -
PVA100P6R
PVA Series: 100 mm Array - Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 PNP Programmable for LO/DO
2 m (6.5 ft) Integral Cable -
PVA375P6EQ
NOPVA Series: 375 mm Array - Emitter
Range: 2 m; Input: 12-30 V dc
Output: Not Applicable
M12 Integral QD -
PVA375P6Q
PVA Series: 375 mm Array Pair - Emitter/Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 PNP (on receiver)
2 m M12 Pigtail QD -
PVA300P6EQ
PVA Series: 300 mm Array - Emitter
Range: 2 m; Input: 12-30 V dc
Output: Not Applicable
M12 Pigtail QD -
PVA300P6RQ
PVA Series: 300 mm Array - Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 PNP Programmable for LO/DO
M12 Pigtail QD -
PVA100N6
PVA Series: 100 mm Array Pair - Emitter/Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 NPN (on receiver)
2 m (6.5 ft) Integral Cables -
PVA100N6R
PVA Series: 100 mm Array - Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 NPN Programmable for LO/DO
2 m (6.5 ft) Integral Cable -
PVA225P6E
PVA Series: 225 mm Array - Emitter
Range: 2 m; Input: 12-30 V dc
Output: Not Applicable
2 m (6.5 ft) Integral Cable -
PVA225P6R
PVA Series: 225 mm Array - Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 PNP Programmable for LO/DO
2 m (6.5 ft) Integral Cable -
PVA300N6EQ
PVA Series: 300 mm Array - Emitter
Range: 2 m; Input: 12-30 V dc
Output: Not Applicable
M12 Pigtail QD -
PVA300P6Q
PVA Series: 300 mm Array Pair - Emitter/Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 PNP (on receiver)
2 m M12 Pigtail QD -
PVA375P6
PVA Series: 375 mm Array Pair - Emitter/Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 PNP (on receiver)
2 m (6.5 ft) Integral Cables -
PVA375P6E
PVA Series: 375 mm Array - Emitter
Range: 2 m; Input: 12-30 V dc
Output: Not Applicable
2 m (6.5 ft) Integral Cable -
PVA375P6R
PVA Series: 375 mm Array - Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 PNP Programmable for LO/DO
2 m (6.5 ft) Integral Cable -
PVA100N6E
PVA Series: 100 mm Array - Emitter
Range: 2 m; Input: 12-30 V dc
Output: Not Applicable
2 m (6.5 ft) Integral Cables -
PVA100N6EQ
PVA Series: 100 mm Array - Emitter
Range: 2 m; Input: 12-30 V dc
Output: Not Applicable
M12 Integral QD -
PVA100N6Q
PVA Series: 100 mm Array Pair - Emitter/Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 NPN (on receiver)
M12 Integral QD -
PVA100N6RQ
PVA Series: 100 mm Array - Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 NPN Programmable for LO/DO
M12 Pigtail QD -
PVA100P6EQ W/6IN
PVA Series: 100 mm Array
Emitter ; Range: 2 m; Input: 12-30 V dc
Output: Not Applicable
150 mm (6 in) M12 Pigtail QD -
PVA100P6RQ W/6IN
PVA Series: 100 mm Array
Receiver; Range: 2 m; Input: 12-30 V dc
Output: 1 PNP
150 mm (6 in) M12 Pigtail QD -
PVA225N6
PVA Series: 225 mm Array Pair - Emitter/Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 NPN (on receiver)
2 m (6.5 ft) Integral Cables -
PVA225N6E
PVA Series: 225 mm Array - Emitter
Range: 2 m; Input: 12-30 V dc
Output: Not Applicable
2 m (6.5 ft) Integral Cable -
PVA225N6R
PVA Series: 225 mm Array - Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 NPN Programmable for LO/DO
2 m (6.5 ft) Integral Cable -
PVA225P6
PVA Series: 225 mm Array Pair - Emitter/Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 PNP (on receiver)
2 m (6.5 ft) Integral Cables -
PVA225P6QK
PVA Series: 225 mm Array
E/R and bracket kit; Range: 2 m; Input: 12-30 V dc
Output: 1 PNP (on receiver)
M12 2 m Pigtail QD -
PVA300N6
PVA Series: 300 mm Array Pair - Emitter/Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 NPN (on receiver)
2 m (6.5 ft) Integral Cables -
PVA300N6E
PVA Series: 300 mm Array - Emitter
Range: 2 m; Input: 12-30 V dc
Output: Not Applicable
2 m (6.5 ft) Integral Cable -
PVA300N6R
PVA Series: 300 mm Array - Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 NPN Programmable for LO/DO
2 m (6.5 ft) Integral Cable -
PVA300N6RQ
PVA Series: 300 mm Array - Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 NPN Programmable for LO/DO
M12 Pigtail QD -
PVA300P6
PVA Series: 300 mm Array Pair - Emitter/Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 PNP (on receiver)
2 m (6.5 ft) Integral Cables -
PVA300P6E
PVA Series: 300 mm Array - Emitter
Range: 2 m; Input: 12-30 V dc
Output: Not Applicable
2 m (6.5 ft) Integral Cable -
PVA300P6R
PVA Series: 300 mm Array - Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 PNP Programmable for LO/DO
2 m (6.5 ft) Integral Cable -
PVA375N6
PVA Series: 375 mm Array Pair - Emitter/Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 NPN (on receiver)
2 m (6.5 ft) Integral Cables -
PVA375N6E
PVA Series: 375 mm Array - Emitter
Range: 2 m; Input: 12-30 V dc
Output: Not Applicable
2 m (6.5 ft) Integral Cable -
PVA375N6EQ
PVA Series: 375 mm Array - Emitter
Range: 2 m; Input: 12-30 V dc
Output: Not Applicable
M12 Pigtail QD -
PVA375N6Q
PVA Series: 375 mm Array Pair - Emitter/Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 NPN (on receiver)
M12 Pigtail QD -
PVA375N6R
PVA Series: 375 mm Array - Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 NPN Programmable for LO/DO
2 m (6.5 ft) Integral Cable -
PVA375N6RQ
PVA Series: 375 mm Array - Receiver
Range: 2 m; Input: 12-30 V dc
Output: 1 NPN Programmable for LO/DO
M12 Pigtail QD