• Voltar

  • Non-Contact Pick-to-Light Point and Array Selection

    Non-contact pick-to-light points and arrays use a photoelectric sensor to automatically verify picks and picking sequences during normal pick motion. Optical touch buttons are zero force activated and require no physical pressure to operate for a more ergonomic solution. Furthermore, arrays enable a larger sensing area. 

    K50 Pro Series 50 mm Programmable Optical Pick-to-Light

    IO-Link Enabled

    Pick-to-Light Óptico Programável Série K50 Pro 50 mm

    Ergonomic lights ideal for pick-to-light applications in a wide range of industries with rugged versatility of RGB LEDs.

    Características Principais


    Rated IEC IP67 and IP69K to withstand harsh washdown environments

    Immune to ambient light, EMI and RFI interference

    Up to fourteen standard colors in one device

    Sequence mode is included on IO-Link models and can be adjusted to indicate level, takt time, and more

    PICK-IQ models feature faster response speed on Modbus network

    Começando Em: $ USD

    Saiba Mais →
    PVS28 Parts Verification Sensor

    Parts Verification

    PVS28 Parts Verification Sensor

    Visual operator guidance with touchless activation for fast and reliable picking and fulfillment applications.

    Características Principais


     

    • Provides optical sensing and intuitive indication in one device
    • No controller needed—devices are completely self-contained
    • Resistant to ambient light, EMI, and RFI interference 
    • Green, yellow, and red indicator colors come standard; 7 colors are available when using Pro Editor
    • Available in 100 mm and 225 mm array lengths for small and large bins

    Começando Em: $ USD

    Saiba Mais →

    IO-Link Enabled

    Parts Verification

    Ergonomic lights ideal for pick-to-light applications in a wide range of industries with rugged versatility of RGB LEDs.

    Visual operator guidance with touchless activation for fast and reliable picking and fulfillment applications.

    Características Principais


    Rated IEC IP67 and IP69K to withstand harsh washdown environments

    Immune to ambient light, EMI and RFI interference

    Up to fourteen standard colors in one device

    Sequence mode is included on IO-Link models and can be adjusted to indicate level, takt time, and more

    PICK-IQ models feature faster response speed on Modbus network

    Características Principais


     

    • Provides optical sensing and intuitive indication in one device
    • No controller needed—devices are completely self-contained
    • Resistant to ambient light, EMI, and RFI interference 
    • Green, yellow, and red indicator colors come standard; 7 colors are available when using Pro Editor
    • Available in 100 mm and 225 mm array lengths for small and large bins

    Começando Em: $ USD 

    Saiba Mais →

    Começando Em: $ USD 

    Saiba Mais →
    K50 Core Series 50 mm General Purpose Illuminated Pick-to-Light Optical Buttons

    General Purpose

    Sensores Pick-to-Light Ópticos de 50 mm: Série K50

    Provides improved ways to install a pick-to-light system with the option of industry-standard Modbus RTU protocol for communication.

    Características Principais


    Max of 3 color displays

    5 color options: green, yellow, red, blue, white

     

    12 to 30 V dc power option

    IP67, IP69K washdown rated

    Modbus compatible

    Max sensing range of 2.0 m with polarized retro-reflective or 100 mm with fixed-field

    Começando Em: $ USD

    Saiba Mais →
    PTL110 Series Scalable, Versatile Pick-to-Light Devices

    Scalable

    PTL110 Series Scalable, Versatile Pick-to-Light Devices

    Cascadable, pick point device with three-digit display and colored indicator, offering speed, flexibility and low installed cost.

    Características Principais


    3-digit, 7-segment display that can be inverted

    14 color choices: red, green, blue, yellow, magenta, orange, violet, white, cyan, amber, lime green, spring green, sky blue, rose

    10 to 30 V dc power option

    IP54 rated

    Wireless and Modbus compatible

    PICK-IQ

    Começando Em: $ USD

    Saiba Mais →

    General Purpose

    Scalable

    Provides improved ways to install a pick-to-light system with the option of industry-standard Modbus RTU protocol for communication.

    Cascadable, pick point device with three-digit display and colored indicator, offering speed, flexibility and low installed cost.

    Características Principais


    Max of 3 color displays

    5 color options: green, yellow, red, blue, white

     

    12 to 30 V dc power option

    IP67, IP69K washdown rated

    Modbus compatible

    Max sensing range of 2.0 m with polarized retro-reflective or 100 mm with fixed-field

    Características Principais


    3-digit, 7-segment display that can be inverted

    14 color choices: red, green, blue, yellow, magenta, orange, violet, white, cyan, amber, lime green, spring green, sky blue, rose

    10 to 30 V dc power option

    IP54 rated

    Wireless and Modbus compatible

    PICK-IQ

    Começando Em: $ USD 

    Saiba Mais →

    Começando Em: $ USD 

    Saiba Mais →

    Key Terms

    Pick-IQ

    PICK-IQis a purpose-built, Modbus-compatible serial bus protocol that uses a Common ID to reduce the typical latency that results from polling multiple devices.

    Warehouse Manager

    Need More Information?

    Contact an Engineer

    Our Experts are available to help you find the right illumination solution!

    Barreira de Verificação de Peça Única Pick-to-Lights: Série PVD

    Single Component

    Barreira de Verificação de Peça Única Pick-to-Lights: Série PVD

    One-component, compact systems that automatically operates in either diffuse or retroreflective mode, depending on your application

    Características Principais


    12 to 30 V dc power option

    IP62 rated

    Max sensing range of 2 m for retroreflective or 400 for diffuse models

    Available in 100 and 225 mm lengths

    Começando Em: $ USD

    Saiba Mais →
    Barreira de Verificação de Peças: Série PVL

    Large Part Sensing

    Barreira de Verificação de Peças: Série PVL

    Highly visible pick and mis-pick indication with mounting versatility.

    Características Principais


    12 to 30 V dc power option

    IP50 rated

    Max sensing range of 1.5 m


    Available in 225 and 500 mm lengths

    Começando Em: $ USD

    Saiba Mais →
    Barreira de Verificação de Peça Pick-to-Lights: Série PVA

    4 Lengths

    Barreira de Verificação de Peça Pick-to-Lights: Série PVA

    Compact array, available in 4 lengths to fit many sizes and configurations of existing parts bins.

    Características Principais


    12 to 30 V dc power option

    IP62 rated

    Max sensing range of 2 m


    Available in 100, 225, 300, and 375 mm lengths

    Começando Em: $ USD

    Saiba Mais →
    Botões de Verificação Touch Pick-to-Light da Série VTB

    Illuminated Base

    Botões de Verificação Touch Pick-to-Light da Série VTB

    Ergonomic touch button that features a brightly illuminated base for enhanced visual indication.

    Características Principais


    Max of 2 color displays

    3 color options: green, red, blue

    12 to 30 V dc

    IP66 rated

    Começando Em: $ USD

    Saiba Mais →
    Pick-to-Light Iluminado de 80 mm: Série K80

    Flush Mounting

    Pick-to-Light Iluminado de 80 mm: Série K80

    Compact, single-point devices for error-proofing of bin-picking operations with a 50 mm dome.

    Características Principais


    Max of 2 color displays

    3 color options: green, red, yellow

    12 to 30 V dc power option

    IP65, IP67 rated

    Max sensing range of 100 mm 

    Começando Em: $ USD

    Saiba Mais →

    Single Component

    Large Part Sensing

    4 Lengths

    One-component, compact systems that automatically operates in either diffuse or retroreflective mode, depending on your application

    Highly visible pick and mis-pick indication with mounting versatility.

    Compact array, available in 4 lengths to fit many sizes and configurations of existing parts bins.

    Características Principais


    12 to 30 V dc power option

    IP62 rated

    Max sensing range of 2 m for retroreflective or 400 for diffuse models

    Available in 100 and 225 mm lengths

    Características Principais


    12 to 30 V dc power option

    IP50 rated

    Max sensing range of 1.5 m


    Available in 225 and 500 mm lengths

    Características Principais


    12 to 30 V dc power option

    IP62 rated

    Max sensing range of 2 m


    Available in 100, 225, 300, and 375 mm lengths

    Começando Em: $ USD 

    Saiba Mais →

    Começando Em: $ USD 

    Saiba Mais →

    Começando Em: $ USD 

    Saiba Mais →

    Illuminated Base

    Flush Mounting

    Ergonomic touch button that features a brightly illuminated base for enhanced visual indication.

    Compact, single-point devices for error-proofing of bin-picking operations with a 50 mm dome.

    Características Principais


    Max of 2 color displays

    3 color options: green, red, blue

    12 to 30 V dc

    IP66 rated

    Características Principais


    Max of 2 color displays

    3 color options: green, red, yellow

    12 to 30 V dc power option

    IP65, IP67 rated

    Max sensing range of 100 mm 

    Começando Em: $ USD 

    Saiba Mais →

    Começando Em: $ USD 

    Saiba Mais →

    Related Products

    Capacitive Touch Button Pick-to-Light Selection
    Capacitive Touch Buttons
    Pick-to-Light Push Button Selection
    Push Buttons

    HAVE A QUESTION?


    CONTACT AN ENGINEER

    Contact Us
    Adicionar à Minha Biblioteca
    Adicionado